Mugen Seiki
Mugen Seiki MTC3 1/10 Electric Touring Car Kit
Mugen Seiki MTC3 1/10 Electric Touring Car Kit
SKU:MUGA2006
Out of stock
Couldn't load pickup availability
Mugen Seiki MTC3 1/10 Electric Touring Car Kit
The Mugen Seiki MTC3 1/10 Electric Touring Car Kit is an evolution of the highly successful MTC2 and MTC2R platform. The prototype was first raced at the 2024 IFMAR World Championship, where the two MTC3’s entered in the event both made the A final in its first event with Ronald Volker finishing 4th and Jacob Cruz finishing 10th. Below is a list of features and details for the Mugen Seiki MTC3 1/10th Electric Touring Car.
The MTC-3 comes with a completely new design. The only parts that come from the MTC-2R are the drive shafts, coil, diff and drive belt. The MTC-3 has a 1.5 mm thick aluminum chassis that works great on both asphalt and carpet. The top deck design is unique and the short shocks round out a nice new suspension package.
New 1.5mm Aluminum Chassis
- used with standard type screws only
- The new chassis provides a wider range of torsion stiffness adjustments to be able to tune for all track conditions.
- The new chassis eliminates the need for a carbon chassis option.
- Lower center of gravity for improved cornering. (0.5mm and 0.7mm respectively)
- The chassis design has less overhang to provide more clearance and reduces the chance of the chassis touching the racing surface.
New Shock and Upper Arm Angle Adjustability
- No shims needed. No shims to be misplaced.
- Quicker and easier to make adjustments.
New Adjustable Layshaft Height
- Allows you to use the spur gear lowest position possible.
- Ability to use 90T spur gear for a large range of categories and track conditions.
- Better weight distribution.
New Upper Decks
- Allows the upper bulkhead plates be removed.
- Easy access differential, without disassembling anything else beside the rear upperdeck
- New more compact bulkheads.
Shock Towers
- New shock tower screw directly to the bulkheads. (No additional parts needed)
- possible to use fixed or active
New Short Shocks
- Provide lower center of gravity and improved geometry.
- Reduced weight.
New Bodyposts
- Easier to mount the body.
- The front has two distances to make the body prep easier.
- The rear has three options available for mounting the body. (horizontal, vertical & horizontal with additional part to mount into the bodyshell)
- The rear has an adjustable suspension uptravel stopper included in the kit.
New Body Support
- Body support is included in the MTC3 kit.
New Upper Arms
- New design using a 6mm ball.
- Two bodystop positions.
Lightweight Bumper
- Carbon upper plate includes an adjustable suspension up travel limiter.
Please note, electronics, tires, and a body are not included in the kit.
Share
